Difference between revisions of "HP LaserJet 1020"
Line 19: | Line 19: | ||
$> make install |
$> make install |
||
$> make install-hotplug |
$> make install-hotplug |
||
− | $> make cups |
||
3. Télécharger le firmware dans l'imprimante: |
3. Télécharger le firmware dans l'imprimante: |
Revision as of 20:53, 27 February 2013
Installation
1. Installer foomatic-filters:
$> wget http://www.openprinting.org/download/foomatic/foomatic-filters-4.0.17.tar.gz $> tar -xf foomatic-filters-4.0.17.tar.gz $> cd foomatic-filters-4.0.17 $> ./configure --prefix=/usr $> make $> make install
2. Installer foo2zjs:
$> wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz $> tar -xf foo2zjs.tar.gz $> cd foo2zjs $> make $> ./getweb 1020 $> make install $> make install-hotplug
3. Télécharger le firmware dans l'imprimante:
$> cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/usb/lp0
4. Décharger le driver usblp:
$> rmmod usblp
5. Redémarrer CUPS:
$> /etc/rc.d/init.d/cups restart
L'imprimante devrait être détectée par CUPS