Difference between revisions of "Scanner Epson Perfection V100 Photo"
(→Installation instructions for scanner EPSON Perfection V100 Photo) |
|||
Line 10: | Line 10: | ||
Note 3: The epkowa back-end comes from iscan (not from sane). |
Note 3: The epkowa back-end comes from iscan (not from sane). |
||
+ | |||
+ | |||
+ | ==HVLinux== |
||
+ | iscan-registry --add interpreter usb 0x04b8 0x012d \ |
||
+ | /usr/lib/libesint66 /usr/share/iscan/esfw66.bin |
||
+ | |||
+ | ==Manual== |
||
1. Download: |
1. Download: |
Revision as of 15:45, 2 April 2015
Installation instructions for scanner EPSON Perfection V100 Photo
The scanner can be controlled either by iscan or by xsane, but in both cases the firmware files, the iscan plugin library, iscan-data, iscan and the sane configuration files (dll.conf and epkowa.conf) must be installed.
Note 1: The usbfs (/proc/bus/usb) filesystem is not necessary even if using libusb.
Note 2: It seems that the iscan-registry command must be executed even if using sane.
Note 3: The epkowa back-end comes from iscan (not from sane).
HVLinux
iscan-registry --add interpreter usb 0x04b8 0x012d \ /usr/lib/libesint66 /usr/share/iscan/esfw66.bin
Manual
1. Download:
iscan-plugin-gt-s600-2.0.0-1.c2.i386.rpm
or
iscan-plugin-gt-s600-2.1.2-1.x86_64.rpm
2. Extract content of RPM:
rpm2cpio iscan-plugin-gt-s600-...rpm > iscan-plugin.cpio
3. Extract files from CPIO archive:
mkdir iscan-plugin cd iscan-plugin cpio -ivd < ../iscan-plugin.cpio
4. Copy firmware files and plugin:
cp -a usr/share/iscan /usr/share cp -a usr/lib/iscan /usr/lib
5. Download and install " iscan-data_1.9.0-1.tar.gz"
./configure --prefix=/usr && make && make install
6. Download and install "iscan_2.26.4-2.tar.gz"
./configure --prefix=/usr --localstatedir=/var && make && make install
8. Create entry for scanner:
iscan-registry --add interpreter usb 0x04b8 0x012d \ /usr/lib/iscan/libesint66 \ /usr/share/iscan/esfw66.bin
This will create the file /var/lib/iscan/interpreter.
9. In "/etc/sane.d/dll.conf":
epkowa
10. Create file "/etc/sane.d/epkowa.conf":
usb
Note: when I put this line in epkowa.conf:
usb 0x04b8 0x012d
it took 2 minutes for iscan to show the scan window!
11. Activate either xsane or iscan plugin (or both) for Gimp:
ln -s /usr/bin/xsane /usr/lib/gimp/2.0/plug-ins ln -s /usr/bin/iscan /usr/lib/gimp/2.0/plug-ins
12. Add your username to the scanner group:
useradd -G scanner your_username
Example to launch xsane abd display some traces: SANE_DEBUG_EPKOWA=CMD xsane
Example to specify the device directly: SANE_DEBUG_EPKOWA=CMD xsane epkowa:interpreter
Avasys download URL:
http://www.avasys.jp/english/linux_e/dl_scan.html