Difference between revisions of "LTSP"
(One intermediate revision by the same user not shown) | |||
Line 6: | Line 6: | ||
Ce fichier grossit à cause de ce message d'errreur, répété sans arrêt: |
Ce fichier grossit à cause de ce message d'errreur, répété sans arrêt: |
||
+ | (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 |
||
− | |||
− | (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->pIOOffset is 0x0000 |
||
Problème réglé en modifiant le code source du driver trident. |
Problème réglé en modifiant le code source du driver trident. |
Latest revision as of 23:30, 19 March 2008
Contents
[hide]LTSP-4.2
Problème de crash X.org
Sur un terminal LTSP, causé par le fichier '/tmp/var/log/Xorg.0.0.log' qui devient trop gros et prends toute la place.
Ce fichier grossit à cause de ce message d'errreur, répété sans arrêt:
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
Problème réglé en modifiant le code source du driver trident.
What should I do if I have poor quality sound (pops, clicks and squeaks) - particularly when dragging or scrolling windows?
This is caused by X writing blindly to the video card's instruction queue without checking to see if the queue is full. This will lock the PCI bus for about 40 - 50 audio cycles, causing pops, clicks and squeaks. The via82cxxx_audio driver is still somewhat fragile, so it is possible that some applications will fault ungracefully if the bus is disrupted badly enough (e.g. with SDL applications). You can make X play nicely with the PCI bus by adding Option "PciRetry" "true" to the "Device" stanza. Nasty pops and glitches will go away, and system stability will be much improved.
LTSP-5
Message d'erreur du terminal LTSP:
/bin/sh: can't access tty; job control turned off
Solution: Contrairement à LTSP-4, il faut éliminer l'adresse IP de l'option 'root-path' du fichier /etc/dhcpd.conf.
Si vous n'arrivez pas à vous authentifier, et que le serveur reporte ce message dans /var/log/auth:
(pam_unix) check pass; user unknown (pam_unix) authentication failure; logname= uid=0 euid=0 tty=tty1 ruser= rhost= FAILED LOGIN (1) on 'tty1' FOR `UNKNOWN', User not known to the underlying authentication module
Solution: Éditer /opt/ltsp/i386/etc/ssh/ssh_config et activer l'option:
PasswordAuthentication yes
Cela n'est pas nécessaire si vous n'utilisez pas ssh (XDCMP)
Remplacement de LDM (utilisant ssh) par XDCMP (pas de ssh)
Ajouter cette ligne au fichier /opt/ltsp/i386/etc/lts.conf:
SCREEN_07 = startx
Élimination du 'splash screen'
Enlever les options
quiet squash
du fichier tftpboot/ltsp-5/ubuntu_6.10_i386/pxelinux.cfg/default